Service Rates
The charges shown are due to many factors - including, type and value of firearm being worked on, quality and quantity of work requested by the customer - prices charged by our shop may vary from those shown. We will provide a quote prior to any work being performed.
SERVICE CHARGES
Per Man Hour ......……………………... 35.00
Per Man & Machine Hour. .......…... 55.00
MINIMUM CHARGE PER GUN ..... 35.00
Written appraisals,….....……………….30.00
Cost estimates………………………..……Free
SERVICES OFFERED
CLEAN & OIL CUSTOMER GUN
Consisting of completely stripping gun, cleaning all parts, checking for wear, making suggestions to a customer of services needed to put in A-1 condition ..............………………….…… 25.00
METAL FINISHING
OXYNATE® 7 REBLUING
Abrasive I bead blast I wire wheel (matte) finish ............. .. 120.00
Deluxe Finish : Same as above followed with #240 and #400 grit polish with all screw holes and corners protected and square
Handgun ..........…………………………. 130.00
Rifle/shotgun ....……………………..... 150.00
Master Finish : Same as Deluxe Finish with all polishing marks removed, no ripples, and finished with #555 polish to a mirror finish
Handgun ............................................. .265.00
Rifle/shotgun ..............………………...300.00
IM'", BELGIAN BLUING
Handgun ..........………........... 150.00 ........... 325.00
Rifle/shotgun ....................... 150.00 ........... 350.00
SLOW RUST BLUING I BROWNING …... .250.00 ……… 650.00
OXYNATE® 84 BLUING OF STAINLESS STEEL or cast Win. 94's and others
Add to price of appropriate normal steel bluing cost .................... 50.00 ……..... 85.00
NitreBlue™ BLUING (Small parts I accessories)
Not including polishing time ................................... 50.00 .... ……175.00
Spray-on finishes: pricing for single color for handguns and long guns;does not include price of assembly/disassembly
Cerakote ....................................... 150.00
KG Gunkote .................................. 110.00
Dura Coat ...................................... 100.00
BEAD, SANDBLAST OR WIRE BRUSH STAINLESS STEEL. ............. 75.00
ELECTROLESS NICKEL PLATING
Depending on firearm and satin or polish finish ............. 175.00
STRIPPING NICKEL
Removing old nickel finish prior to bluing or replating .......... 100.00
PARKERIZING ....................................... 150.00
ENGINE-TURNING BOLT ............................... 75.00 ............ 125.00
METAL CHECKERING .................................... Hourly Rate
ENGINE-TURNING SMALL PARTS ………… Hourly Rate
DRAW-FILING {per man hour) ...................... Hourly Rate
SIGHT WORK
SIGHT IN CUSTOMER GUN - Does not include cost of ammo............ 50.00
BORE SIGHTING CUSTOMER GUN …...................... 20.00
PATTERN SHOTGUN - Does not include cost of ammo…...................... 50.00
DRILL AND TAP BARREL OR RECEIVER FOR SIGHTS
Per hole ............................................................ 20.00
CUT DOVETAIL IN BARREL ................ 60.00
INSTALL DOVETAIL SIGHT ......................... 25.00
INSTALL FRONT SIGHT RAMP
Sweat-on type............ 50.00
Screw-on type (including drill & tap) ............... 60.00
Band type …….… ………………… ………. Hourly Rate
INSTALL INSERT IN PISTOL SIGHT .………..... 40.00
INSTALL FRONT /MID-RIB SHOTGUN BEAD (plus cost of bead)..... 25.00
Plug hole and re-drill for bead .............. 40.00
INSTALL RECEIVER SIGHTS
Gun drilled and tapped ...................................................... .20.00
SCOPE MOUNTING
Gun drilled and tapped ................................................ 35.00
GENERAL BARREL, ACTION & RIFLE WORK
CHECK HEADSPACE……………….35.00
MAKE CHAMBER CAST... ........................................ 50.00
REMOVE STUCK FIRED CASE FROM CHAMBER ………………. 50.00
REMOVE LIVE ROUND FROM CHAMBER ……………………….65.00
REMOVE OBSTRUCTION FROM BORE .................. Hourly Rate
REMOVE FOULING FROM BARREL .................... Hourly Rate+ Materials
LAP BARREL ............................... 50.00
INSTALL LINER IN BARREL- Not including cost of liner or bluing... 100.00
CUT AND CROWN BARREL………………...45.00
CHAMBER AND FIT BARREL TO ACTION Does not include the cost of the barrel,
action, polishing, bluing ...............................200.00
INSTALL PRE-THREADED AND CHAMBERED BARREL
Not including Polishing & Bluing........................125.00
LAP IN BOLT LUGS - Not including setting back barrel
or fitting new barrel .................................... 50.00 ............. 75.00
WELDING ON NEW BOLT HANDLE .............. 100.00 ........... 200.00
FORGING BOLT HANDLE ................................... 65.00 ........... 120.00
MAKE AND INSTALL SPRING ......... Hourly Rate
SAFETIES, INSTALLING
Dakota, Gentry, Mod 70Type Safety with shroud (+finishing) ..... 150.00 ..175.00
Mark 11/ Beuhler type ............................ 50.00 ........... 100.00
Chapman Swing Safety Lever ........... 55.00 ........... 135.00
TRIGGERS (INSTALLATION OR ADJUSTMENT)
Shilen, Timney, Dayton-Traister, Moyertype ........... 45.00 .............. 90.00
Double-Set ...................... ………….100.00 ……... 250.00
Single Set .................................................. 50.00 ............ 140.00
INSTALL MUZZLE BRAKE (threaded barrel} ...... 30.00 ……..... 75.00
RECONTOUR FRONT OR REAR RECEIVER RING ………50.00............ 140.00
INSTALL BARREL BAND SWIVEL ........................ Hourly Rate
SHOTGUN WORK
LONG FORCING CONE
Non-plated bores, per barrel ........... 55.00 ............ 80.00
Plated bores, per barrel .......................... 75.00 ........... 100.00
RESOLDER RIB - Not including bluing……………………. Hourly Rate
RESOLDER FOR ENDLUG - Not including bluing ...................... Hourly Rate
RAISING DENT IN BARREL
Not including bluing ........................................... 50.00 ............ 150.00
STRAIGHTEN I ADJUST BARREL .......................... 50.00 ............. 95.00
POLISH CHAMBER/BORE ................................... 35.00 ............. 75.00
BACK-BORING- Per Barrel, non-plated bores ….... Hourly Rate
OPEN I MODIFY CHOKE
Per barrel or tube, non-plated bores ..….... 55.00 ..…. 115.00
INSTALL SCREW-IN CHOKE (plus tubes) -Win-Choke®, Colonial, etc. (non-plated bore) ........................................................................ 85.00 ........... 150.00
PORT BARREL - PER BARREL ............................ 75.00 ........... 150.00
REFITTING HINGE PIN LUG .......................... 225.00 …...….340.00
MUZZLE LOADER WORK
PULL B........................................................... 25.00 .............. 45.00
REMOVE BROKEN RAMROD FROM BARREL ........... 60.00 ............ 100.00
STUCK BREECH PLUG ................................ 60.00 ............ 120.00
HANDGUN WORK
CHAMFER REVOLVER BARREL ............................. 30.00 ............ 45.00
CHAMFER REVOLVER CYLINDER ...................... 40.00 ............ 80.00
REVOLVER ACTION JOB- Clean, smooth action, not including replacement of parts ...................... 75.00 .......... 160.00
REBARREL REVOLVER- Remove old barrel, replace with new factory barrel, labor only ...................................................................... 60.00 ......... 160.00
STRAIGHTEN CRANE ON REVOLVER .................... 35.00 ............. 80.00
INSTALL CRANE LOCK ......................................... 30.00 ............. 50.00
REMOVE/MODIFY REVOLVER HAMMER SPUR ............. 40.00 ............. 80.00
CONVERT REVOLVER FROM SQUARE BUTTTO ROUND BUTT...... 70.00 ........... 120.00
SEMI-AUTO PISTOLACTION JOB - Clean, smooth action, not including any parts .... .......................................................................... 120.00 ......... 220.00
TIGHTEN SLIDE OF 1911 AUTO .......... . 120.00 .......... 175.00
FIT BARREL TO 1911 AUTO, Not including barrel Price Range
Non-Ramped Barrel ............................ 90.00
Ramped Barrel ...................................... 100.00
FIT AND INSTALL BARREL BUSHING ON 1911 AUTO
Does not include cost of bushing .........…. 50.00
BEVEL MAGAZINE WELL OF 1911 AUTO ............. 50.00
CHECKER FRONT OF FRAME ON 1911 AUTO ............. 150.00
STIPPLE FRAME ........................ 40.00
OPEN AND MODIFY EJECTION PORT OF 1911 AUTO SLIDE…50.00-120.00
THROAT, POLISH BARREL AND FEED RAMP OF 1911 AUTO... 40.00-100.00
FIT NEW TRIGGER TO 1911
-Does not include cost of trigger ….45.00- 80.00
FIT CUSTOM HAMMERTO 1911
-Does not include cost of hammer …………. 45.00 - 100.00
CUT SLIDE FOR BO-MAR, w/o sight
Plain Cut ..... 120.00……....160.00
w/Side Shields ..... 130.00…….. 200.00
CUT SLIDE FOR DOVETAIL FRONT SIGHT
w/o cost of sight ………50.00………. 95.00
CUT SLIDE FOR NOVAK REAR, w/o cost of sight…… 115.00 ........... 150.00
INSTALL STAKE-ON FRONT, w/o cost of sight ..... 35.00 ............. 60.00
INSTALL FIBER OPTIC FRONT SIGHT (existing dovetail} .... 25.00 - 45.00
INSTALL REAR SIGHT (existing dovetail, w/o cost of sight) ............... 30.00
FLATIEN SLIDE TOP & SERRATE, w/o cost of sight ....... 75.00
DEHORN & BREAK EDGES FOR CARRY
(Not including refinishing) ................................ 50.00
FULL MELT DOWN BEVELING ........... 80.00……....150.00
MODIFY 1911 AUTO FRAME FOR BEAVERTAIL SAFETY
Includes fitting of safety, does NOT include cost of safety or refinishing………………...... 80.00
INSTALL AUTO PISTOL COMPENSATOR ..... 90.00
STOCK WORK
INSTALL RECOIL PAD - Labor only .......... 40.00. ............ 95.00
INSTALL ADJUSTABLE BUTI PLATE- Labor only ..... 80.00 ........... 150.00
INSTALL SLING SWIVELS - Std and 0/D ............. 35.00 ............. 60.00
INSTALL RECOIL REDUCER
Simple installation in butt stock ............... 25.00 ............. 50.00
Hydraulic butt plate-style (Gra-Coil or Counter Coil®) ....... 150.00 - 210.00
Drill Stock & Install Recoil Reducer ................. 50.00 ............. 95.00
Fit and install barreled action ........................ 65.00 ......... 120.00
INSTALL ADJUSTABLE COMB HARDWARE .......... 125.00 ............ 240.00
AR·15 WORK
MAINTENANCE CLEANING (includes complete disassembly, clean, safety check, oil and reassemble} ........................ 65.00 ............. 85.00
MAINTENANCE REBUILD (includes new spring & new gas rings added to the Maintenance Cleaning} ................. 120.00 ........... 150.00
INSTALLAFTERMARKETTRIGGER ... 40.00 ............ 80.00
INSTALLAFTERMARKET FOREND/FREE-FLOAT ........... .45.00 ............ 140.00
ASSEMBLE COMPLETE UPPER .................................... 45.00 ............ 85.00
ASSEMBLE COMPLETE LOWER ................... 45.00 .............. 85.00
ASSEMBLE COMPLETE RIFLE .................... 100.00 .......... 150.00
INSTALL FLASH HIDER ON PRE-THREADED BARREL ............. 25.00 - 45.00
THREAD BARREL ON LATHE .................................... 75.00 ........... 175.00
OPEN GAS PORTS FOR FUNCTIONING ........ ………60.00 ............ 80.00
INSTALL OR REPLACE GAS BLOCK ...... 35.00 ............ 80.00
INSTALL OR REPLACE AR BARREL ................ ….….55.00 ............. 80.00
INSTALL OR REPLACE BUTISTOCK & BUFFERTUBE ….…….20.00- 35.00
The charges shown are due to many factors - including, type and value of firearm being worked on, quality and quantity of work requested by the customer - prices charged by our shop may vary from those shown. We will provide a quote prior to any work being performed.
SERVICE CHARGES
Per Man Hour ......……………………... 35.00
Per Man & Machine Hour. .......…... 55.00
MINIMUM CHARGE PER GUN ..... 35.00
Written appraisals,….....……………….30.00
Cost estimates………………………..……Free
SERVICES OFFERED
CLEAN & OIL CUSTOMER GUN
Consisting of completely stripping gun, cleaning all parts, checking for wear, making suggestions to a customer of services needed to put in A-1 condition ..............………………….…… 25.00
METAL FINISHING
OXYNATE® 7 REBLUING
Abrasive I bead blast I wire wheel (matte) finish ............. .. 120.00
Deluxe Finish : Same as above followed with #240 and #400 grit polish with all screw holes and corners protected and square
Handgun ..........…………………………. 130.00
Rifle/shotgun ....……………………..... 150.00
Master Finish : Same as Deluxe Finish with all polishing marks removed, no ripples, and finished with #555 polish to a mirror finish
Handgun ............................................. .265.00
Rifle/shotgun ..............………………...300.00
IM'", BELGIAN BLUING
Handgun ..........………........... 150.00 ........... 325.00
Rifle/shotgun ....................... 150.00 ........... 350.00
SLOW RUST BLUING I BROWNING …... .250.00 ……… 650.00
OXYNATE® 84 BLUING OF STAINLESS STEEL or cast Win. 94's and others
Add to price of appropriate normal steel bluing cost .................... 50.00 ……..... 85.00
NitreBlue™ BLUING (Small parts I accessories)
Not including polishing time ................................... 50.00 .... ……175.00
Spray-on finishes: pricing for single color for handguns and long guns;does not include price of assembly/disassembly
Cerakote ....................................... 150.00
KG Gunkote .................................. 110.00
Dura Coat ...................................... 100.00
BEAD, SANDBLAST OR WIRE BRUSH STAINLESS STEEL. ............. 75.00
ELECTROLESS NICKEL PLATING
Depending on firearm and satin or polish finish ............. 175.00
STRIPPING NICKEL
Removing old nickel finish prior to bluing or replating .......... 100.00
PARKERIZING ....................................... 150.00
ENGINE-TURNING BOLT ............................... 75.00 ............ 125.00
METAL CHECKERING .................................... Hourly Rate
ENGINE-TURNING SMALL PARTS ………… Hourly Rate
DRAW-FILING {per man hour) ...................... Hourly Rate
SIGHT WORK
SIGHT IN CUSTOMER GUN - Does not include cost of ammo............ 50.00
BORE SIGHTING CUSTOMER GUN …...................... 20.00
PATTERN SHOTGUN - Does not include cost of ammo…...................... 50.00
DRILL AND TAP BARREL OR RECEIVER FOR SIGHTS
Per hole ............................................................ 20.00
CUT DOVETAIL IN BARREL ................ 60.00
INSTALL DOVETAIL SIGHT ......................... 25.00
INSTALL FRONT SIGHT RAMP
Sweat-on type............ 50.00
Screw-on type (including drill & tap) ............... 60.00
Band type …….… ………………… ………. Hourly Rate
INSTALL INSERT IN PISTOL SIGHT .………..... 40.00
INSTALL FRONT /MID-RIB SHOTGUN BEAD (plus cost of bead)..... 25.00
Plug hole and re-drill for bead .............. 40.00
INSTALL RECEIVER SIGHTS
Gun drilled and tapped ...................................................... .20.00
SCOPE MOUNTING
Gun drilled and tapped ................................................ 35.00
GENERAL BARREL, ACTION & RIFLE WORK
CHECK HEADSPACE……………….35.00
MAKE CHAMBER CAST... ........................................ 50.00
REMOVE STUCK FIRED CASE FROM CHAMBER ………………. 50.00
REMOVE LIVE ROUND FROM CHAMBER ……………………….65.00
REMOVE OBSTRUCTION FROM BORE .................. Hourly Rate
REMOVE FOULING FROM BARREL .................... Hourly Rate+ Materials
LAP BARREL ............................... 50.00
INSTALL LINER IN BARREL- Not including cost of liner or bluing... 100.00
CUT AND CROWN BARREL………………...45.00
CHAMBER AND FIT BARREL TO ACTION Does not include the cost of the barrel,
action, polishing, bluing ...............................200.00
INSTALL PRE-THREADED AND CHAMBERED BARREL
Not including Polishing & Bluing........................125.00
LAP IN BOLT LUGS - Not including setting back barrel
or fitting new barrel .................................... 50.00 ............. 75.00
WELDING ON NEW BOLT HANDLE .............. 100.00 ........... 200.00
FORGING BOLT HANDLE ................................... 65.00 ........... 120.00
MAKE AND INSTALL SPRING ......... Hourly Rate
SAFETIES, INSTALLING
Dakota, Gentry, Mod 70Type Safety with shroud (+finishing) ..... 150.00 ..175.00
Mark 11/ Beuhler type ............................ 50.00 ........... 100.00
Chapman Swing Safety Lever ........... 55.00 ........... 135.00
TRIGGERS (INSTALLATION OR ADJUSTMENT)
Shilen, Timney, Dayton-Traister, Moyertype ........... 45.00 .............. 90.00
Double-Set ...................... ………….100.00 ……... 250.00
Single Set .................................................. 50.00 ............ 140.00
INSTALL MUZZLE BRAKE (threaded barrel} ...... 30.00 ……..... 75.00
RECONTOUR FRONT OR REAR RECEIVER RING ………50.00............ 140.00
INSTALL BARREL BAND SWIVEL ........................ Hourly Rate
SHOTGUN WORK
LONG FORCING CONE
Non-plated bores, per barrel ........... 55.00 ............ 80.00
Plated bores, per barrel .......................... 75.00 ........... 100.00
RESOLDER RIB - Not including bluing……………………. Hourly Rate
RESOLDER FOR ENDLUG - Not including bluing ...................... Hourly Rate
RAISING DENT IN BARREL
Not including bluing ........................................... 50.00 ............ 150.00
STRAIGHTEN I ADJUST BARREL .......................... 50.00 ............. 95.00
POLISH CHAMBER/BORE ................................... 35.00 ............. 75.00
BACK-BORING- Per Barrel, non-plated bores ….... Hourly Rate
OPEN I MODIFY CHOKE
Per barrel or tube, non-plated bores ..….... 55.00 ..…. 115.00
INSTALL SCREW-IN CHOKE (plus tubes) -Win-Choke®, Colonial, etc. (non-plated bore) ........................................................................ 85.00 ........... 150.00
PORT BARREL - PER BARREL ............................ 75.00 ........... 150.00
REFITTING HINGE PIN LUG .......................... 225.00 …...….340.00
MUZZLE LOADER WORK
PULL B........................................................... 25.00 .............. 45.00
REMOVE BROKEN RAMROD FROM BARREL ........... 60.00 ............ 100.00
STUCK BREECH PLUG ................................ 60.00 ............ 120.00
HANDGUN WORK
CHAMFER REVOLVER BARREL ............................. 30.00 ............ 45.00
CHAMFER REVOLVER CYLINDER ...................... 40.00 ............ 80.00
REVOLVER ACTION JOB- Clean, smooth action, not including replacement of parts ...................... 75.00 .......... 160.00
REBARREL REVOLVER- Remove old barrel, replace with new factory barrel, labor only ...................................................................... 60.00 ......... 160.00
STRAIGHTEN CRANE ON REVOLVER .................... 35.00 ............. 80.00
INSTALL CRANE LOCK ......................................... 30.00 ............. 50.00
REMOVE/MODIFY REVOLVER HAMMER SPUR ............. 40.00 ............. 80.00
CONVERT REVOLVER FROM SQUARE BUTTTO ROUND BUTT...... 70.00 ........... 120.00
SEMI-AUTO PISTOLACTION JOB - Clean, smooth action, not including any parts .... .......................................................................... 120.00 ......... 220.00
TIGHTEN SLIDE OF 1911 AUTO .......... . 120.00 .......... 175.00
FIT BARREL TO 1911 AUTO, Not including barrel Price Range
Non-Ramped Barrel ............................ 90.00
Ramped Barrel ...................................... 100.00
FIT AND INSTALL BARREL BUSHING ON 1911 AUTO
Does not include cost of bushing .........…. 50.00
BEVEL MAGAZINE WELL OF 1911 AUTO ............. 50.00
CHECKER FRONT OF FRAME ON 1911 AUTO ............. 150.00
STIPPLE FRAME ........................ 40.00
OPEN AND MODIFY EJECTION PORT OF 1911 AUTO SLIDE…50.00-120.00
THROAT, POLISH BARREL AND FEED RAMP OF 1911 AUTO... 40.00-100.00
FIT NEW TRIGGER TO 1911
-Does not include cost of trigger ….45.00- 80.00
FIT CUSTOM HAMMERTO 1911
-Does not include cost of hammer …………. 45.00 - 100.00
CUT SLIDE FOR BO-MAR, w/o sight
Plain Cut ..... 120.00……....160.00
w/Side Shields ..... 130.00…….. 200.00
CUT SLIDE FOR DOVETAIL FRONT SIGHT
w/o cost of sight ………50.00………. 95.00
CUT SLIDE FOR NOVAK REAR, w/o cost of sight…… 115.00 ........... 150.00
INSTALL STAKE-ON FRONT, w/o cost of sight ..... 35.00 ............. 60.00
INSTALL FIBER OPTIC FRONT SIGHT (existing dovetail} .... 25.00 - 45.00
INSTALL REAR SIGHT (existing dovetail, w/o cost of sight) ............... 30.00
FLATIEN SLIDE TOP & SERRATE, w/o cost of sight ....... 75.00
DEHORN & BREAK EDGES FOR CARRY
(Not including refinishing) ................................ 50.00
FULL MELT DOWN BEVELING ........... 80.00……....150.00
MODIFY 1911 AUTO FRAME FOR BEAVERTAIL SAFETY
Includes fitting of safety, does NOT include cost of safety or refinishing………………...... 80.00
INSTALL AUTO PISTOL COMPENSATOR ..... 90.00
STOCK WORK
INSTALL RECOIL PAD - Labor only .......... 40.00. ............ 95.00
INSTALL ADJUSTABLE BUTI PLATE- Labor only ..... 80.00 ........... 150.00
INSTALL SLING SWIVELS - Std and 0/D ............. 35.00 ............. 60.00
INSTALL RECOIL REDUCER
Simple installation in butt stock ............... 25.00 ............. 50.00
Hydraulic butt plate-style (Gra-Coil or Counter Coil®) ....... 150.00 - 210.00
Drill Stock & Install Recoil Reducer ................. 50.00 ............. 95.00
Fit and install barreled action ........................ 65.00 ......... 120.00
INSTALL ADJUSTABLE COMB HARDWARE .......... 125.00 ............ 240.00
AR·15 WORK
MAINTENANCE CLEANING (includes complete disassembly, clean, safety check, oil and reassemble} ........................ 65.00 ............. 85.00
MAINTENANCE REBUILD (includes new spring & new gas rings added to the Maintenance Cleaning} ................. 120.00 ........... 150.00
INSTALLAFTERMARKETTRIGGER ... 40.00 ............ 80.00
INSTALLAFTERMARKET FOREND/FREE-FLOAT ........... .45.00 ............ 140.00
ASSEMBLE COMPLETE UPPER .................................... 45.00 ............ 85.00
ASSEMBLE COMPLETE LOWER ................... 45.00 .............. 85.00
ASSEMBLE COMPLETE RIFLE .................... 100.00 .......... 150.00
INSTALL FLASH HIDER ON PRE-THREADED BARREL ............. 25.00 - 45.00
THREAD BARREL ON LATHE .................................... 75.00 ........... 175.00
OPEN GAS PORTS FOR FUNCTIONING ........ ………60.00 ............ 80.00
INSTALL OR REPLACE GAS BLOCK ...... 35.00 ............ 80.00
INSTALL OR REPLACE AR BARREL ................ ….….55.00 ............. 80.00
INSTALL OR REPLACE BUTISTOCK & BUFFERTUBE ….…….20.00- 35.00
The charges shown are due to many factors - including, type and value of firearm being worked on, quality and quantity of work requested by the customer - prices charged by our shop may vary from those shown. We will provide a quote prior to any work being performed.
SERVICE CHARGES
Per Man Hour ......……………………... 35.00
Per Man & Machine Hour. .......…... 55.00
MINIMUM CHARGE PER GUN ..... 35.00
Written appraisals,….....……………….30.00
Cost estimates………………………..……Free
SERVICES OFFERED
CLEAN & OIL CUSTOMER GUN
Consisting of completely stripping gun, cleaning all parts, checking for wear, making suggestions to a customer of services needed to put in A-1 condition ..............………………….…… 25.00
METAL FINISHING
OXYNATE® 7 REBLUING
Abrasive I bead blast I wire wheel (matte) finish ............. .. 120.00
Deluxe Finish : Same as above followed with #240 and #400 grit polish with all screw holes and corners protected and square
Handgun ..........…………………………. 130.00
Rifle/shotgun ....……………………..... 150.00
Master Finish : Same as Deluxe Finish with all polishing marks removed, no ripples, and finished with #555 polish to a mirror finish
Handgun ............................................. .265.00
Rifle/shotgun ..............………………...300.00
IM'", BELGIAN BLUING
Handgun ..........………........... 150.00 ........... 325.00
Rifle/shotgun ....................... 150.00 ........... 350.00
SLOW RUST BLUING I BROWNING …... .250.00 ……… 650.00
OXYNATE® 84 BLUING OF STAINLESS STEEL or cast Win. 94's and others
Add to price of appropriate normal steel bluing cost .................... 50.00 ……..... 85.00
NitreBlue™ BLUING (Small parts I accessories)
Not including polishing time ................................... 50.00 .... ……175.00
Spray-on finishes: pricing for single color for handguns and long guns;does not include price of assembly/disassembly
Cerakote ....................................... 150.00
KG Gunkote .................................. 110.00
Dura Coat ...................................... 100.00
BEAD, SANDBLAST OR WIRE BRUSH STAINLESS STEEL. ............. 75.00
ELECTROLESS NICKEL PLATING
Depending on firearm and satin or polish finish ............. 175.00
STRIPPING NICKEL
Removing old nickel finish prior to bluing or replating .......... 100.00
PARKERIZING ....................................... 150.00
ENGINE-TURNING BOLT ............................... 75.00 ............ 125.00
METAL CHECKERING .................................... Hourly Rate
ENGINE-TURNING SMALL PARTS ………… Hourly Rate
DRAW-FILING {per man hour) ...................... Hourly Rate
SIGHT WORK
SIGHT IN CUSTOMER GUN - Does not include cost of ammo............ 50.00
BORE SIGHTING CUSTOMER GUN …...................... 20.00
PATTERN SHOTGUN - Does not include cost of ammo…...................... 50.00
DRILL AND TAP BARREL OR RECEIVER FOR SIGHTS
Per hole ............................................................ 20.00
CUT DOVETAIL IN BARREL ................ 60.00
INSTALL DOVETAIL SIGHT ......................... 25.00
INSTALL FRONT SIGHT RAMP
Sweat-on type............ 50.00
Screw-on type (including drill & tap) ............... 60.00
Band type …….… ………………… ………. Hourly Rate
INSTALL INSERT IN PISTOL SIGHT .………..... 40.00
INSTALL FRONT /MID-RIB SHOTGUN BEAD (plus cost of bead)..... 25.00
Plug hole and re-drill for bead .............. 40.00
INSTALL RECEIVER SIGHTS
Gun drilled and tapped ...................................................... .20.00
SCOPE MOUNTING
Gun drilled and tapped ................................................ 35.00
GENERAL BARREL, ACTION & RIFLE WORK
CHECK HEADSPACE……………….35.00
MAKE CHAMBER CAST... ........................................ 50.00
REMOVE STUCK FIRED CASE FROM CHAMBER ………………. 50.00
REMOVE LIVE ROUND FROM CHAMBER ……………………….65.00
REMOVE OBSTRUCTION FROM BORE .................. Hourly Rate
REMOVE FOULING FROM BARREL .................... Hourly Rate+ Materials
LAP BARREL ............................... 50.00
INSTALL LINER IN BARREL- Not including cost of liner or bluing... 100.00
CUT AND CROWN BARREL………………...45.00
CHAMBER AND FIT BARREL TO ACTION Does not include the cost of the barrel,
action, polishing, bluing ...............................200.00
INSTALL PRE-THREADED AND CHAMBERED BARREL
Not including Polishing & Bluing........................125.00
LAP IN BOLT LUGS - Not including setting back barrel
or fitting new barrel .................................... 50.00 ............. 75.00
WELDING ON NEW BOLT HANDLE .............. 100.00 ........... 200.00
FORGING BOLT HANDLE ................................... 65.00 ........... 120.00
MAKE AND INSTALL SPRING ......... Hourly Rate
SAFETIES, INSTALLING
Dakota, Gentry, Mod 70Type Safety with shroud (+finishing) ..... 150.00 ..175.00
Mark 11/ Beuhler type ............................ 50.00 ........... 100.00
Chapman Swing Safety Lever ........... 55.00 ........... 135.00
TRIGGERS (INSTALLATION OR ADJUSTMENT)
Shilen, Timney, Dayton-Traister, Moyertype ........... 45.00 .............. 90.00
Double-Set ...................... ………….100.00 ……... 250.00
Single Set .................................................. 50.00 ............ 140.00
INSTALL MUZZLE BRAKE (threaded barrel} ...... 30.00 ……..... 75.00
RECONTOUR FRONT OR REAR RECEIVER RING ………50.00............ 140.00
INSTALL BARREL BAND SWIVEL ........................ Hourly Rate
SHOTGUN WORK
LONG FORCING CONE
Non-plated bores, per barrel ........... 55.00 ............ 80.00
Plated bores, per barrel .......................... 75.00 ........... 100.00
RESOLDER RIB - Not including bluing……………………. Hourly Rate
RESOLDER FOR ENDLUG - Not including bluing ...................... Hourly Rate
RAISING DENT IN BARREL
Not including bluing ........................................... 50.00 ............ 150.00
STRAIGHTEN I ADJUST BARREL .......................... 50.00 ............. 95.00
POLISH CHAMBER/BORE ................................... 35.00 ............. 75.00
BACK-BORING- Per Barrel, non-plated bores ….... Hourly Rate
OPEN I MODIFY CHOKE
Per barrel or tube, non-plated bores ..….... 55.00 ..…. 115.00
INSTALL SCREW-IN CHOKE (plus tubes) -Win-Choke®, Colonial, etc. (non-plated bore) ........................................................................ 85.00 ........... 150.00
PORT BARREL - PER BARREL ............................ 75.00 ........... 150.00
REFITTING HINGE PIN LUG .......................... 225.00 …...….340.00
MUZZLE LOADER WORK
PULL B........................................................... 25.00 .............. 45.00
REMOVE BROKEN RAMROD FROM BARREL ........... 60.00 ............ 100.00
STUCK BREECH PLUG ................................ 60.00 ............ 120.00
HANDGUN WORK
CHAMFER REVOLVER BARREL ............................. 30.00 ............ 45.00
CHAMFER REVOLVER CYLINDER ...................... 40.00 ............ 80.00
REVOLVER ACTION JOB- Clean, smooth action, not including replacement of parts ...................... 75.00 .......... 160.00
REBARREL REVOLVER- Remove old barrel, replace with new factory barrel, labor only ...................................................................... 60.00 ......... 160.00
STRAIGHTEN CRANE ON REVOLVER .................... 35.00 ............. 80.00
INSTALL CRANE LOCK ......................................... 30.00 ............. 50.00
REMOVE/MODIFY REVOLVER HAMMER SPUR ............. 40.00 ............. 80.00
CONVERT REVOLVER FROM SQUARE BUTTTO ROUND BUTT...... 70.00 ........... 120.00
SEMI-AUTO PISTOLACTION JOB - Clean, smooth action, not including any parts .... .......................................................................... 120.00 ......... 220.00
TIGHTEN SLIDE OF 1911 AUTO .......... . 120.00 .......... 175.00
FIT BARREL TO 1911 AUTO, Not including barrel Price Range
Non-Ramped Barrel ............................ 90.00
Ramped Barrel ...................................... 100.00
FIT AND INSTALL BARREL BUSHING ON 1911 AUTO
Does not include cost of bushing .........…. 50.00
BEVEL MAGAZINE WELL OF 1911 AUTO ............. 50.00
CHECKER FRONT OF FRAME ON 1911 AUTO ............. 150.00
STIPPLE FRAME ........................ 40.00
OPEN AND MODIFY EJECTION PORT OF 1911 AUTO SLIDE…50.00-120.00
THROAT, POLISH BARREL AND FEED RAMP OF 1911 AUTO... 40.00-100.00
FIT NEW TRIGGER TO 1911
-Does not include cost of trigger ….45.00- 80.00
FIT CUSTOM HAMMERTO 1911
-Does not include cost of hammer …………. 45.00 - 100.00
CUT SLIDE FOR BO-MAR, w/o sight
Plain Cut ..... 120.00……....160.00
w/Side Shields ..... 130.00…….. 200.00
CUT SLIDE FOR DOVETAIL FRONT SIGHT
w/o cost of sight ………50.00………. 95.00
CUT SLIDE FOR NOVAK REAR, w/o cost of sight…… 115.00 ........... 150.00
INSTALL STAKE-ON FRONT, w/o cost of sight ..... 35.00 ............. 60.00
INSTALL FIBER OPTIC FRONT SIGHT (existing dovetail} .... 25.00 - 45.00
INSTALL REAR SIGHT (existing dovetail, w/o cost of sight) ............... 30.00
FLATIEN SLIDE TOP & SERRATE, w/o cost of sight ....... 75.00
DEHORN & BREAK EDGES FOR CARRY
(Not including refinishing) ................................ 50.00
FULL MELT DOWN BEVELING ........... 80.00……....150.00
MODIFY 1911 AUTO FRAME FOR BEAVERTAIL SAFETY
Includes fitting of safety, does NOT include cost of safety or refinishing………………...... 80.00
INSTALL AUTO PISTOL COMPENSATOR ..... 90.00
STOCK WORK
INSTALL RECOIL PAD - Labor only .......... 40.00. ............ 95.00
INSTALL ADJUSTABLE BUTI PLATE- Labor only ..... 80.00 ........... 150.00
INSTALL SLING SWIVELS - Std and 0/D ............. 35.00 ............. 60.00
INSTALL RECOIL REDUCER
Simple installation in butt stock ............... 25.00 ............. 50.00
Hydraulic butt plate-style (Gra-Coil or Counter Coil®) ....... 150.00 - 210.00
Drill Stock & Install Recoil Reducer ................. 50.00 ............. 95.00
Fit and install barreled action ........................ 65.00 ......... 120.00
INSTALL ADJUSTABLE COMB HARDWARE .......... 125.00 ............ 240.00
AR·15 WORK
MAINTENANCE CLEANING (includes complete disassembly, clean, safety check, oil and reassemble} ........................ 65.00 ............. 85.00
MAINTENANCE REBUILD (includes new spring & new gas rings added to the Maintenance Cleaning} ................. 120.00 ........... 150.00
INSTALLAFTERMARKETTRIGGER ... 40.00 ............ 80.00
INSTALLAFTERMARKET FOREND/FREE-FLOAT ........... .45.00 ............ 140.00
ASSEMBLE COMPLETE UPPER .................................... 45.00 ............ 85.00
ASSEMBLE COMPLETE LOWER ................... 45.00 .............. 85.00
ASSEMBLE COMPLETE RIFLE .................... 100.00 .......... 150.00
INSTALL FLASH HIDER ON PRE-THREADED BARREL ............. 25.00 - 45.00
THREAD BARREL ON LATHE .................................... 75.00 ........... 175.00
OPEN GAS PORTS FOR FUNCTIONING ........ ………60.00 ............ 80.00
INSTALL OR REPLACE GAS BLOCK ...... 35.00 ............ 80.00
INSTALL OR REPLACE AR BARREL ................ ….….55.00 ............. 80.00
INSTALL OR REPLACE BUTISTOCK & BUFFERTUBE ….…….20.00- 35.00